LINE VISION 98 + FRITSCHI VIPEC EVO 12 100MM

LINE VISION 98 23

Sharing the same build and featherweight feel as the 108 straight down to the THC. The Vision will rally blown out snow, arc on groomers, and even motor skin-tracks if that's your thing. The 98mm waist footprint offers versatility for those days that you don't need the float.

TECHNICAL CHARACTERISTICS :

Construction :

Core: Partly Cloudy
• Base: Sintered 1.3
• Construction: Capwall
• Special Reinforcement: THC Technology
• Early Rise: Tip/Tail
• Early Taper: Tip/Tail
• Flex Pattern: Directional
• Stiffnes: 7
• Radius: 16.5
• Sidecut: 131-98-119
• Tip: 131
• Waist: 98
• Tail: 119
• Stance back from Center: 42.2 mm
• Mounting from Tail: 80.3 cm
• Drill Specs: 3.6 x 9.5

FRITSCHI VIPEC EVO 12 100MM 23

The VIPEC EVO 12 100 MM from Fritschi is a touring ski binding that is back this year with a vengeance. Its ease of use and safety have been greatly improved to allow freeriders to focus on the fun.

The changes are in the toe and heel area. Thanks to thefixed stop and a visual indication, the toe of the shoe finds its optimal fitting position naturally. A light touch is all it takes for the system to close thanks to theprecise engagement of the pin levers in the inserts. The movement is similar to that of an alpine ski binding.
The rigid, non-rotating heel piece increases precision and maneuverability. Unlike other insert bindings, the flow of forces generated during turns is not interrupted. The heel piece always maintains its lateral stability.

From a safety point of view, the risks are minimized in the event of a forward fall since the binding allows for immediate release of the shoe in the event of a frontal release.

On the toeboard, the two inserts are attached to a carriage that passes through the binding. The carriage can slide sideways on either side of the binding, but is retained by a spring. This gives a lateral release elasticity of 13mm before the release of the shoe by opening the pins to the DIN value regulated on the stop.

This binding is equipped with 2 mounting wedges and comes in this version with a ski stop of 100 mm wide.

TECHNICAL CHARACTERISTICS :

Construction :

• Front side release with DIN setting and 13mm clearance
• Emergency release on the way up
• New easy to put on
• Easy and fast handling
• Heel power transmission
• Din values: 4-12
• Ski width: > 70 mm
• Adjustment range: 25 mm
• Ski stop series 100 mm